• 15000mm Waterproof: The shell is made from a nylon fabric rated for waterproofing up to 15000mm, perfect for Indian monsoons on a motorcycle.
• Double Ripstop Nylon: The Double Ripstop weave of the abrasion-resistant nylon shell prevents small tears from spreading and lengthens the life of the jacket.
• 5000g/24hr Breathability: Nylon fabric is breathable and helps manage sweat and condensation. The waterproof membrane allows water vapour to pass through but keeps water out, keeping you dry and cool.

• Hi-Viz Green Shell: When it rains heavily, visibility typically goes down. The Hi-Viz shell of the rain jacket keeps you visible to oncoming traffic.
• Blacked-Out Retro-Reflective Trims: Sometimes, you need to continue riding after dark. The blacked-out retro-reflective trims light up in the headlight of oncoming traffic and keep you visible.

• Made for Motorcycling: The H2Go Pro 3 Rain Jacket is engineered, cut, and sized to be worn easily over a riding jacket.
• Independent Destination Jacket: The H2Go Pro 3 Rain Jacket can also be worn as an independent rain jacket.
• Pre-Curved Arms: Ideally pre-curved for the riding posture, the snugger fit of the arms reduces wind resistance and prevents fatigue.
• Heat-Sealed Seams: Precision-sealed seams prevent the ingress of water at the seams and keep you dry.
• DryCore WR Zipper: Water Resistance zipper, covered with a wide gutter flap with velcro that lets you wear the jacket easily and keeps you dry once the jacket is zipped up.
• 3-Panel Hood with Cord Lock: 3-panel design makes the hood compact and ergonomic. Cord Lock lets you cinch the hood to your preference.
• Independently Actuating Hood: The hood actuates independently of the collar and provides more flexibility for head movement.
• Collapsible Hood: Tuck the hood away while riding, or wear the hood under your helmet. The collapsible hood gives you the freedom to decide.

• Rear Exhaust Vents: Inverted rear exhaust vents on the shoulder blades assist in the removal of hot and humid air from inside the jacket, and keep you cool and dry.
• Cord Lock On Hem: Cord Locks on the bottom, on either side, let you adjust the fit of the jacket to your preference.
• Gloves Friendly Cuffs: Elasticated cuffs with forearms wide enough to fit over gloves lets you easily pull the sleeves of H2Go Pro 3 Rain Jacket over your riding jacket and gloves.
• High Collar: The height of the collar is designed to prevent capillary water ingress while riding, from under the chin of the helmet.
• Extremely Lightweight: Weighs only 300 gms.

• The H2Go Pro 3 Rain Jacket is engineered, cut, and sized to be worn easily over a riding jacket without having to choose a larger size.

• The H2Go Pro 3 Rain Jacket has a warranty of 6 months from the date of purchase/delivery.
• Retro-reflective panels, trims and logo application are not covered under warranty.
• To know the warranty policy of Rynox in detail.

• Undo all zippers and fasteners
• Shake off any surface dirt
• Wipe clean with a damp microfiber cloth
• Use a soft brush if required

Step 2 – Which Detergent?

• Use (in order of preference)
  • Purpose-made tech-wash
  • Neutral unscented liquid detergent
  • Woolen liquid detergent
  • Baby shampoo
• Completely Avoid
  • Any type of granular powder detergent
  • Any type of heavily scented liquid detergent
  • Any type of fabric softener or bleach

Step 3 – Soak

• Dissolve 1 cap of detergent in a bucket of water
• Soak for at least 30 minutes
• Avoid hot water. Test with the back of your hand. If it’s too hot for your hand, it’s too hot for your rain jacket/pants

Step 4 – Wash and Rinse

• Agitate and scrub with your hands
• Focus on spots with grease and grime
• Repeat until clean
• Rinse multiple times until free of detergent
• Avoid using hard, abrasive brushes. Use a soft brush if required.

Step 5 – Dry and Store

• Hang dry in a cool ventilated shaded area
• Once dry, store in a cool, ventilated, moisture-free area, away from house-dust
• Do not wring. Do not tumble dry. Do not iron. Do not bleach. Do not expose to direct sunlight while drying.